What is the heat dissipation of the system?
The whole system should run on average at 1000 BTU/hr and a maximum at 1500 BTU/hr.
It is in the end a very small system and it does not run with a lot of Watts.
Related Articles
Connect To Microscope
The microscope can be connected via the ONI software called NimOS : Click on Acquire, and then click on Connect To Microscope: In the pop-up window, click on Confirm And Connect to proceed with the connection: Wait for the initialization to finish. ...
What slides/samples are compatible with the system?
The Nanoimager works optimally with #1.5H coverslips, which have 170µm thickness. The most popular chambers are: ibidi (µ-Slide 8 Well Glass Bottom, No. 1.5) ] Lab-Tek (Nunc™ Lab-Tek™ II Chambered cover-glass, No. 1.5) 35 mm petri dishes with #1.5 ...
FAQ
What slides/samples are compatible with the system? The Nanoimager works optimally with #1.5H coverslips, which have 170µm thickness. The most popular chambers are: ibidi (µ-Slide 8 Well Glass Bottom, No. 1.5) ] Lab-Tek (Nunc™ Lab-Tek™ II Chambered ...
Temperature Control
Temperature Control: Target: set the target temperature. All the thermistor readings can be monitored in the Microscope Box Temperature tab: Current: show the temperature feedback in real-time, averaged from all thermistors. Hover around the current ...
Routine Maintenance
While very low maintenance is necessary for your Nanoimager, it is worth checking for defects at regular intervals. Cables Check cables and plugs for defects. Objective Cleaning Take extra care when cleaning the objective lens and always use lens ...