Following materials default profiles are now changed:
- Mineral wool was changed to a generic LCA profile (was: Insulation, semi rigid glass wool, water repellent, uncoated, 5.1 Km2/W, 200 mm, 21 kg/m3, 4.20 kg/m2, Arena (Isover))
- Oriented Strand Board was changed to a generic LCA profile (was: Oriented Strand Board (OSB), 6 - 40 x 590 - 1250 x 1840 - 6250 mm, 600 kg/m3, AGEPAN (Sonae Indústria))
- Paint was changed from a paint manufactured in UAE to Teknos paint from Finland
Was: Acrylic emulsion paint for interior application, 1.297 kg/l, 38% solids/volume, film thickness dry/wet: 30-50/79-132 micrometers, 12.7-7.6 m2/l, Fenomastic Wonderwall (Jotun)
Now: Water-borne interior paints, 1.36 kg/L, average coverage 8-10 m2/L, Biora, Ekora, Kolibri Sand, Paneelikattomaali, Ranch, Superlateksi, Tapettipohjamaali, Teknospro, Tela, Timantti, Trend (Teknos)
- Floor filler was changed for Wooden joist floor assembly as it was a specialty material with high impacts
Was: Wooden floor filler HSP 34
Now: Self levelling mortar, for floors, walls and overhead appl., 3-50 mm, 1400 kg/m3, Pericret (PCI Augsburg)
- Wall render was changed for Concrete internal wall assembly, incl. reinforcement and filler to a more appropriate profile
Was: Wooden floor filler HSP 34
Now: Finishing wall mortars, French average, 3 mm, 4.2 kg/m2, Donnee par default (MDEGD)
- The membrane in Ceramic tiles, incl. underlayment membrane was updated as the profile was not intended for application under ceramic floor
Was: Plastic vapour control layer, 0.2 mm (Tommen Gram)
Now: Waterproof, protective, flexible coating, 1.5 kg/l, Lastogum (PCI Augsburg)
Fixes
to assemblies:
-
Superfluous paint and/or
bitumen membrane was removed from the following assemblies
o
In-situ concrete slab assembly
o
Concrete slab assembly with bubbledeck
o
In-situ concrete roof assembly
o
CLT compact roof assembly
-
Paint and/or render has been
added to the following constructions as was missing from internal side:
o
Lightweight aggregate (LECA)
block external wall assembly, incl. mineral wool insulation and timber frame
o
Concrete external wall assembly
with external insulation incl. timber frame
o
Concrete sandwich element
external wall assembly, incl. EPS insulation
o
Brick sandwich wall assembly,
incl. mineral wool insulation
o
In-situ concrete wall assembly,
incl. mineral wool insulation
o
CLT external wall assembly,
incl. mineral wool insulation
-
Tile adhesive has been added to
the following construction:
o
Ceramic tiles, incl.
underlayment membrane
-
Added bitumen to the assembly OSB sheeting board and bitumen membrane as
is necessary in roofing.
Additional
choices enabled in constructions:
-
The following generic profiles
have been added as options where relevant:
o
Rock wool insulation panels, unfaced, generic, L= 0.0346 W/mK, 50
kg/m3 (applicable for densities: 25-50 kg/m3)
o
Ready-mix concrete,
normal-strength, C20/25 (2900/3600 PSI), 55% recycled binders in cement
(300kg/m3) share of recycled binder