How to adjust the saddle height
Adjusting the saddle height
To adjust the saddle height, open the quick release and lift the saddle. When you’ve found a comfortable riding position, take note of the number on the seat post so you can quickly return to that position when you next unfold the bike. Do not raise the seat post beyond the minimum insertion line.
Adjusting the saddle position
The saddle can be adjusted by tipping upwards or downwards, and forwards or backwards. To do this, loosen the saddle bolts using an allen key. Play with the saddle to find a good position. Tighten the bolts again once you’re happy.
Adjusting the quick release
If the quick release is too tight or too loose, you can adjust it with the thumb screw. Rotate clockwise to tighten, or anticlockwise to loosen. The thumbscrew should be done up just enough so that when the quick release lever is tightened, the seat post is not able to rotate or move downwards when you sit on the bike. Tighter than this may cause damage to the seat post quick release. You can find detailed information on all of the above on page 15 of your FLIT-16 manual.
Related Articles
How to adjust the handlebar height
Tools you'll need 6mm allen key Instructions Place the end of the allen key into the bolt on the handlebar clamp, and turn anti-clockwise to loosen it. Once the clamp is loosened, move towards the front of the bike and wedge the front wheel between ...How to swap the saddle
TOOLS YOU’LL NEED 4mm Allen key INSTRUCTIONS The FLIT-16 is compatible with any standard saddle. To remove the saddle, first, undo the seat post quick release and remove the seat post from your bike. Place the saddle upside down on a table so that ...How to fit the Frost + Sekers Quicklock Saddle Mount
TOOLS YOU’LL NEED 4mm Allen key INSTRUCTIONS First, undo the seat post quick release and remove the seat post from your bike. Place the saddle upside down on a table so that you can easily access the bolts on the saddle rails. Undo both bolts using a ...How to adjust sensitivity or turn off automatic light functionality
If you’d rather manually operate your integrated lights, follow these instructions. You can also adjust the sensitivity if you’d like to keep them automatic, but find that they are turning on too frequently. First, turn your ebike on. Press and hold ...What is the step over height?
55cm