PINGuard™ by Codelocks - Installation Instructions

PINGuard™ by Codelocks - Installation Instructions




 

Please click on the link below to download the Installation Instructions for the PINGuardâ„¢ by Codelocks

 XT1 and XT2

 

 

 

II_PGBC_V1_1020

  Â© 2020 Codelocks Ltd.  All rights reserved.



    • Related Articles

    • KitLock Slam Latch - Installation Instructions

      Suitable for use with the KitLock KL1000 family: KL1000 Classic, KL1000 Classic+, KL1000 G3, KL1000 G3 NetCode, KL1000 NetCode, KL1000 RFID. SPECIAL NOTE The maximum door thickness when using the Slam Latch is 20mm (3/4”). Before installation, ...
    • KL1100 RFID - Installation Instructions & Template

      INSTALLATION Please read carefully: Before installing the lock, familiarise yourself with the operation instructions suited to your KL1100 model, instructions can be found at: www.codelockssupport.com Your KitLock is supplied with the powered latch ...
    • KL1100 RFID - Programming and Operating Instructions

      ABOUT KL1100 RFID The KL1100 RFID can operate in Standalone Mode or in Remote Card Authorisation (RCA) Mode. RCA Mode gives the ability to remotely set-up and allocate cards to locks or lock groups  with our offline or cloud based software. ...
    • Key Secure by Codelocks - Installation Instructions

      Note: This product range is avalible in the US ONLY IMPORTANT INSTALLATION NOTES Key Secure by Codelocks cabinets are supplied fully assembled, ready to install in your chosen location. Cabinets are provided with 1/4” mounting holes through the back ...
    • KL1000 RFID - Installation Instructions

      Special Notes Please read carefully: Before installing the lock, familiarise yourself with the operation and programming instructions. Your lock will require battery load and installation. Your KitLock is supplied ready to fit to doors up to 19mm ...