Lock Cloning

Lock Cloning

1. First you will need to set up a lock with the parameters that you will be cloning onto others.  To do this swipe left on the lock’s name, open InfoParameters and the set your desired parameters. 

Note: Parameters can only be cloned to the same model lock, for example a CL4510’s parameters cannot be copied onto a CL5510.

 

2. Once completed make sure to carry out a synchronisation to implement the changes, this can be done by swiping left on the lock’s name and selecting Sync.

 

3. If you have not already done so, add the lock(s) that you will be cloning onto and go to their parameters page as you did in step one.

 

4. Tap Clone From, on the next page choose the lock you are importing from and confirm. 

Note: If you cannot see Clone From at the top of the page please update K3 Connect through either the Apple App Store or Google Play Store, and make sure your lock's firmware is up to date.

 

           

 

5. All the parameters which have been cloned will appear in red, to save these you will need to synchronise the cloned lock. 

Note: It is not possible to clone NetCodes, Phone, Card or Code clients.

  © 2019 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • 72mm Centred Mortice Lock - Installation Template

      Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.   Open ...
    • 72mm Centred Mortice Lock - Installation Template

      Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.   Open ...
    • Lock FAQ

      Why won't my Audit Trail lock accept any codes that I have entered into the Data Manager? Make sure the access times/days in the Data Manager are correct.  Also make sure you do not have any access times which run from 00:00 to 00:00, if you do, ...
    • Adding a KL Lock to the Portal

        1. From the homepage select either the Locks section in the middle and then click Add Lock or go to the top of the page and click + Add Lock.     2. Select the Kitlock (KL Series) option and select the type of lock you have, the timezone the lock ...
    • Adding a CL Lock to the Portal

      1. Log into the K3Connect application on your android or iOS device.   2. Press the + in the top right hand corner to add your lock, then input the lock's model (CL4510 or CL5510) and a name.   3. When you press the tick symbol you will be prompted ...