KL1550 - Tablet Setup

KL1550 - Tablet Setup

Before your start: You will require an NFC enabled smartphone supplied by Codelocks with the KL1550 Smart App installed.  

The App icon will be on the homepage or accessible via the main Applications menu of the smartphone. You will also need your KL1550 Smart lock and have the batteries installed.

New Profile

1. Create a new profile by touching the  (New Profile) button

2. Enter the details as prompted and touch the  (Save) button to finish

3. Touch the  (Log-in) button to go back to the log-in screen.
When at the log-in screen, your email address will be shown in the email address field. Enter your password and touch the  (Log-in) button

4. You can now add your first lock, touch the  (Lock List) button

5. To add your new lock, click on the  (New Lock) button

6 Enter the details as prompted, including choosing a 6 digit lock ID*.

This ID must not start with a 0 (zero). When done, touch Show Sequence. Enter this sequence immediately into your lock. If the sequence is entered correctly, the blue LED will flash twice to confirm.Touch the KL1550 Smart icon to open the App
 

7. Touch the  (Next) button to finish

Existing Profile

1. Create a new profile by touching the  (Existing Profile) button

2. Enter the details as prompted and touch the  (Save) button to finish

3. Touch the  (Log-in) button to go back to the log-in screen.
When at the log-in screen, your email address will be shown in the email address field. Enter your password and touch the  (Log-in) button

4. You can now add your first lock, touch the  (Lock List) button.

5. To add your new lock, click on the  (New Lock) button.

6. Enter the details as prompted, including choosing a 6 digit lock ID*.

7. Touch the  (Next) button to finish

* This ID must not start with a 0 (zero). When done, touch Show Sequence. Enter this sequence immediately into your lock. If the sequence is entered correctly, the blue LED will flash twice to confirm. Touch the KL1550 Smart icon to open the App.


  © 2019 Codelocks Ltd.  All rights reserved.





Note: The KL1550 is now discontinued, support is no longer available for the KL1550 Smart Lock app however it can be operated in standalone mode. Click here for the standalone Programming and Operating Instructions.




    • Related Articles

    • Adding a KL Lock to the Portal

        1. From the homepage select either the Locks section in the middle and then click Add Lock or go to the top of the page and click + Add Lock.     2. Select the Kitlock (KL Series) option and select the type of lock you have, the timezone the lock ...
    • CL5010AT - Setup the Audit Trail

      a)       Install the lock to your door. b)      Set up audit trail on lock by entering in the below program. #MasterCode • 16 • Date • Date • DayofTheWeek • DayofTheWeek • Time • Time • DSTstart • DSTstart • DSTend • DSTend • DoorID • DoorID ...
    • Firmware Update

        Open the K3 Connect App.   Swipe left on the lock and then select the Info section for the lock you would like to update.   Select Firmware Version.   If new firmware is available for your lock, the Firmware Upgrade screen will open and show you a ...
    • Add a New Client

      Go to the' Clients' logo at the bottom of the page and then select + to add a new client. Next you will need to choose what time of client they are. Either phone, card or code.   Phone Client: The user you would like to add needs to download the ...
    • WiFi Gateway Getting Started Guide

             Introduction The WiFi Gateway is a wireless device used to connect compatible Codelocks smart locks to your WiFi network in conjunction with the K3 Connect App*. It can be used to manage and control locks remotely via the K3 Connect App*. ...