KL1060/KL1550/KL1000 - Firmware/Time & Date Update

KL1060/KL1550/KL1000 - Firmware/Time & Date Update

This step by step will explain how to carry out a firmware update and update the time and date.  If your lock is flashing red and blue and will not accept any NetCodes, this will resolve your issue.

 

Firmware Update

  1. Login to the portal.

  2. Navigate to the lock’s details page.

  3. Enter the MasterCode of the lock in the top blue box and hit continue.

  4. Enter the sequence into the lock and then press continue in the portal (this is essential that continue is pressed).

  5. Save your lock once you have the update sequence

Important: If there is a delay in-between generating the sequence in the portal and entering it into the lock, you will need to enter an update sequence into the lock.  Once you have done this you will need to update the date and time on the lock, if this is not done the NetCodes will not function correctly as they will be out of sync.

 

Update Date and Time

To update the time and date enter the below sequence into your lock.

Example:   #MasterCode  12  YYMMDD  HHmm ••

 

 = Blue Confirmation Flash

YY= Year

MM= Month

DD = Day

HH= Hour

mm= Minute

 

Please note the Year needs to be entered as 14 – KL1550 & KL1000NC ONLY

  © 2019 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • KL1000 NetCode/KL1000 RFID/KL1000 Classic - Firmware/Time & Date Update

      This step by step will explain how to carry out a firmware update and update the time and date.  If your lock is flashing red and blue and will not accept any NetCodes, this will resolve your issue.   Firmware Update Login to the portal. Navigate to ...
    • KL1000 NetCode/KL1000 RFID/KL1000 Classic - Firmware/Time & Date Update

      This step by step will explain how to carry out a firmware update and update the time and date.  If your lock is flashing red and blue and will not accept any NetCodes, this will resolve your issue.   Firmware Update Login to the portal. Navigate to ...
    • Firmware Update

        Open the K3 Connect App.   Swipe left on the lock and then select the Info section for the lock you would like to update.   Select Firmware Version.   If new firmware is available for your lock, the Firmware Upgrade screen will open and show you a ...
    • Adding a KL Lock to the Portal

        1. From the homepage select either the Locks section in the middle and then click Add Lock or go to the top of the page and click + Add Lock.     2. Select the Kitlock (KL Series) option and select the type of lock you have, the timezone the lock ...
    • Update Your Profile Details

      1. To update your profile information, change your cover/profile picture and reset your password first go to the top right hand corner and click on the clog icon then click on profile to open the profile page. Click on update details. you will then ...