KL1000 G3 - Installation Template

KL1000 G3 - Installation Template






Important!

When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size.
Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.

 




IT_KL1000_v1_1220_OL 


  © 2019 Codelocks Ltd.  All rights reserved.
    • Related Articles

    • KL1100 RFID - Installation Instructions & Template

      INSTALLATION Please read carefully: Before installing the lock, familiarise yourself with the operation instructions suited to your KL1100 model, instructions can be found at: www.codelockssupport.com Your KitLock is supplied with the powered latch ...
    • KL1000 NetCode - Installation Template

      Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.   Open ...
    • KL1000 NetCode - Getting Started Installation Instructions and Quick Start Guide

      The KL1000 NetCode supports date/time sensitive NetCodes which can be generated via the NetCode Portal.  You must have access to a browser with internet access to set-up NetCode.   Special Notes Please read carefully: Before installing the lock, load ...
    • KL1100 Keypad - Installation Instructions & Template

      INSTALLATION Please read carefully: Before installing the lock, familiarise yourself with the operation instructions suited to your KL1100 model, instructions can be found at: www.codelockssupport.com Your KitLock is supplied with the powered latch ...
    • KL1000 G3 NetCode - Getting Started Guide

      Before use, two AAA batteries must be fitted by rotating the handle, removing the security screw with the star drive tool provided and sliding the top cover away from the handle. The KL0000 G3 NetCode is supplied with a factory set Master Code ...