Generate an Access Key

Generate an Access Key


  1.  Firstly open the K3 Connect App, click on settings and select User Info.
     

 

        2. Click on the tab Access Key, then select Generate New Access Key.

 

 

        3. The Access Key will be generated and shown as like the below image.

 

  © 2019 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • KL1000 G3 - Getting Started Guide

      Before use, two AAA batteries must be fitted by rotating the handle, removing the security screw with the star drive tool provided and sliding the top cover away from the handle. The KL1000 G3 is supplied with a factory set Master Code (11335577) and ...
    • Key Secure by Codelocks - FAQ

      Does the cabinet come with installation fasteners? Due to the wide variety of wall conditions that the cabinets may be installed on, along with the weight of the cabinet (incl. keys and padlocks), the user will need to supply the proper installation ...
    • Key Secure by Codelocks - FAQ

      Note: This product range is avalible in the US ONLY Does the cabinet come with installation fasteners? Due to the wide variety of wall conditions that the cabinets may be installed on, along with the weight of the cabinet (incl. keys and padlocks), ...
    • A3 RFID - Getting Started Guide

      ABOUT The A3 RFID Standalone Door Controller is a compact, standalone programmable access control system that provides proximity access for up to 1000 users. SPECIFICATIONS Clients Compatible With              13.56MHz MIFARE® (ISO14443 Type A) Max. ...
    • CL5010AT - Access Parameters

      Important: You will be prompted to enter your MasterCode before any changes are made to your settings.   Main Settings From this page, you can change the general settings for your lock. a)       Daylight Saving Settings – It is important that this is ...