Adding a KL Lock to the Portal

Adding a KL Lock to the Portal


 

1. From the homepage select either the Locks section in the middle and then click Add Lock or go to the top of the page and click + Add Lock.

 

 

2. Select the Kitlock (KL Series) option and select the type of lock you have, the timezone the lock will be located in and if you have changed it, the Master Code. Then click on Continue.

Note: Once you have set up your lock please change your Master Code using program 01 (located in your lock's programming instructions).

 

 

3. On the next page, immediately input the generated sequence into the lock and fill in your lock's details. Once completed click Add Lock.

Note: Depending on what lock you are adding, you may need to use the Master Code to access the # key so you are able to input the set up sequence.

Note: If your lock beeps and flashes red halfway through the sequence, the incorrect lock type has been selected.

 

 

4. You will then be presented with the lock's main page, from here you can generate NetCodes, view audit entries, delete and manage your lock.

 

 

 © 2019 Codelocks Ltd.  All rights reserved.
    • Related Articles

    • Adding a CL Lock to the Portal

      1. Log into the K3Connect application on your android or iOS device.   2. Press the + in the top right hand corner to add your lock, then input the lock's model (CL4510 or CL5510) and a name.   3. When you press the tick symbol you will be prompted ...
    • Portal FAQ

          When I try to add an associated user it says they already have an account and will not let me proceed, why? This is because the email address is already registered to the portal, most likely as an administrator.  Attempt to log into the portal ...
    • Portal FAQ

          When I try to add an associated user it says they already have an account and will not let me proceed, why? This is because the email address is already registered to the portal, most likely as an administrator.  Attempt to log into the portal ...
    • Lock FAQ

      Why won't my Audit Trail lock accept any codes that I have entered into the Data Manager? Make sure the access times/days in the Data Manager are correct.  Also make sure you do not have any access times which run from 00:00 to 00:00, if you do, ...
    • Register and Add a New Lock

        Locate the application by searching for 'K3 Connect' in either the Google Play Store or Apple App Store.   When you first open the application either sign in (only if you have used this application before), or sign up and create a new account by ...