Popular Articles
How to Switch from DSteb (PCI) to Serial COM Port on an ETEL drive
The situation at the beginning looks like this. Both RJ45 are wired up directly to the DSTEB PCI card on the host computer and the serial port is probably not in use. (see below) Please consult your electrical schematic to get the port usage of your ...
Acuitas Device Interface (ADI) Library
Introduction The Acuitas Device Interface (ADI) is a windows based library to communicate with all Acuitas supported devices/machines (ratetable, centrifuges, temperature chambers). With the link below you can download ADI (Acuitas Device Interface) ...
Acuitas Motion Studio (AMS)
Introduction The Acuitas Motion Studio (AMS) is a windows application used to communicate with all Acuitas supported devices/machines (ratetable, centrifuges, temperature chambers). With the link below you can download AMS (Acuitas Motion Studio) ...
Acuitas Message Interface Protocol (AMI)
Introduction The Acuitas Message Interface (AMI) is a simple ASCII based protocol to control a Acuitas Control System (ACS) over Ethernet, RS232 or RS422. Download AMI Interface Protocol Description See Attached PDF file.
Assign a Static IP Address in Windows 7
Different Acuitas machines use a static IP address for communication with the outside. To use a computer with Windows 7 the computer must have a static IP address that is on the same subnet as the IP address of the machine. Same subnet means this if ...