Related Articles
NMEA 0183 device not receiving data from NGW-1
If your NMEA 0183 Listener is not showing any data when connected to the NMEA 0183 output of an NGW-1, the first step for fault finding should be to see if the NGW-1 supports the conversions you need. For more information on the steps taken when ...
Configuring the NGW-1 using Toolkit
For a detailed explanation of using Toolkit to configure the NGW-1, please visit the following Article: https://www.actisense.com/knowledge-base/nmea-2000/ngw-1/configuring-the-ngw-1-using-toolkit/
Changing/Upgrading Firmware with the NGW-1
NGW-1 firmware v2.500 and newer Switching between AIS and Standard configurations does not require the firmware to be updated, as Actisense Toolkit can help create the exact configuration by enabling or disabling conversions as required. NGW-1 ...
NGW-1 Normal LED Behaviour
The primary function of the NGW-1’s NMEA 0183 LED is to indicate reception of a valid NMEA 0183 sentence. The NMEA 2000 LEDs main function is to indicate reception of a PGN on the NGW-1 conversion list. For more information on the LED behaviour and ...
Choosing the Right NGW-1
"Why do I need an NGW-1?" Due to the incompatibilities between NMEA 0183 and NMEA 2000, an Actisense NGW-1 is needed to bi-directionally convert data between the two standards. For further information on the NGW-1 and the variants, please visit the ...