Popular Articles
DST-2 Compatibility
To be compatible with the DST-2, your transducer must be piezoelectric depth transducer crystal element using a three wire interface.
DST-2 CAN-H / CAN-L Connections
The CAN connections on the DST-2 were designed for an OEM customer that only required a basic CAN connection. As the DST-2 CAN connections do not meet the strict requirements of NMEA 2000, it is not possible to certify or market the DST-2 as an NMEA ...
DSC/DSE conversion
With the release of firmware version 2.660 for the Actisense NGW-1, we have added conversions from NMEA0183 DSC & DSE sentences to NMEA2000 PGNs. To view the full list of supported conversions for the NGW-1, please refer to the NGW-1 Full Conversion ...
NDC-4 Inputs not working
If only a single input on the NDC-4 seems to be receiving data, please check that your NDC-4 is not in autoswitch mode. When in this mode, only data from input 1 will be used. This function is designed for when using more than one source of the same ...
DST-2 Max/Min Ranges
The typical maximum depth range of the DST-2 is 100 metres. The minimum detectable depth of the DST-2 is typically 0.5 metres – which makes it one of the best in the world. The true minimum depth that is detectable depends far more on the depth ...